5-band EQ

A configured device in the form of a printed circuit board. All you need to connect a microphone, power and connect to the transceiver.

The 5 upper tuning resistors are the equalizer. The others are Microphone Amplifier, Compressor and Audio Output.

 

How to connect to the transceiver is shown in the figure. The current consumption is 8mA, so it is suitable for any transceivers.

 

If you use transceivers from Yaesu, they have 5V  power supply at the microphone connector. It is necessary to install a jumper on the stabilizer as shown in the figure

One of the implementation options is shown in the photo. You can also use a case to protect the board and for an aesthetic appearance.

Technical data:

    • Weight 15g
    • Dimensions 50x40x10mm
    • Supply voltage 8-16V DC
    • Current consumption 8mA
    • Frequency EQ 80/250/550/1200/3000 Hz
    • Compression level with led
    • Microphone amplifier level  0+20dB
    • Adjustable output level.
 

Contents of delivery

    • PCB 5 band EQ
    • Cable 8pin
    • Cable mono
    • Jack 3.5mm female
    • Jack 6.3mm female
    • Jacks 8 pin male

5 band EQ PRICE 40 Euro + shipping

Go to the STORE