Analog S/P meter for Icom radio

Description

The S/P-meter can work with an ICOM transceiver that has a CV-I port (Remove jack on the back of radio).

Below are examples of the most popular Icom models and standard CV-I port setting.

Is version for Icom IC-7100, Icom IC-9700, Icom IC-7300 and IC-7610.

The device has firmware with the address of a specific transceiver model. When ordering, simply indicate the model of your transceiver and before sending the package we will install the firmware for it (device suportes IC-756, IC-756 pro (II-III), IC-746, IC-7600, IC-7700, IC-7800 etc, but need correct soft for specific transceiver model ).

How it to use:

• Just connect device via cable 3.5 mm to transceiver REMOTE input and connect power to S/P-meter 12-16V DC.
• DC cable and 3.5mm (male to male) cable included.

Transceiver setup CI-V

In order for the S-meter to work correctly, it is necessary to set the correct CI-V settings in the transceiver.

Open Menu/Connectors/CI-V and set:

• IC-7100: Baud Rate – 19200; CI-V Address – 88h, CI-V Transceive – ON.
• IC-7300: Baud Rate – 19200; CI-V Address – 94h, CI-V Transceive – ON.
• IC-9700: Baud Rate – 19200; CI-V Address – A2h, CI-V Transceive – ON.
• IC-7610: Baud Rate – 19200; CI-V Address – 98h, CI-V Transceive – ON.