Sale!
UR6QW 8-Band Audio Equalizer V6 for Yaesu / Kenwood / Icom (8-Pin)
UR6QW 8-Band Audio Equalizer V6 for Yaesu / Kenwood / Icom (8-Pin) - Image 2
UR6QW 8-Band Audio Equalizer V6 for Yaesu / Kenwood / Icom (8-Pin) - Image 3
UR6QW 8-Band Audio Equalizer V6 for Yaesu / Kenwood / Icom (8-Pin) - Image 4

UR6QW 8-Band Audio Equalizer V6 for Yaesu / Kenwood / Icom (8-Pin)

(5 customer reviews)

Original price was: 179,00 €.Current price is: 165,00 €.

8-Band EQ is a 8-band sound Equalizer – Compressor – Low noise Mic preamp – Echo effect processor – Noise Gate

This version need external power supply 9-16V DC, min 100mA. Used with transceivers like Yaesu, Kenwood, Elecraft, Cobra, President and other with 8/6/4 pin pole connectors. We can install any connector here

  • Super HiFi clear audio
  • Input jack for any microphone type – 3.5mm/8pin/XLR
  • XLR input jack for Premium dynamic microphone, like Heil PR-781, Shure SM-58,Behringer XM8500 etc
  • Mic Gain amplifier specially designed for low sensitivity dynamic microphones.
  • Noise Gate with shutdown ( can be disabled )

3 in stock

Used to configure the correct connection type for your radio
Product total
Options total
Grand total
  • Done Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Done Secure Payments
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
SKU: Audio equalizer A08-6E-P Category:

Description

UR6QW 8-Band Audio Equalizer V6 (Round 8-Pin Connector)

The UR6QW 8-Band Audio Equalizer V6 is a versatile microphone sound processor equipped with a standard round 8-pin connector. It is fully customizable for Yaesu, Kenwood, Icom, Ten-Tec, and other transceivers utilizing round 8-pin mic jacks.

Combining an 8-band graphic EQ, low-noise preamplifier, adjustable compression, echo effect processor, and noise gate, the V6 gives your SSB signal outstanding clarity and punch for DX pileups or ragchewing.

Key Features:

  • Universal 8-Pin Output: Pinout configured specifically for your 8-pin Yaesu, Kenwood, or Icom transceiver.
  • 8-Band Graphic EQ: Full control over your voice frequency profile for ESSB or sharp contest audio.
  • Universal Mic Input: Supports Dynamic, Electret, and OEM studio/hand microphones via 3.5mm and 8-pin input sockets.
  • Low-Noise Mic Preamp: Specially designed circuit to ensure ultra-clean signal transmission.
  • On-Board Audio Controls: Smooth potentiometers for Compression, Echo depth/delay, and Noise Gate threshold.
  • Power Supply: Standard 9–16V DC jack (5.5 x 2.1 mm) on rear panel.

Additional information

Weight 0,9 kg
Dimensions 24 × 17 × 10 cm
8-band EQ

Yaesu, Icom, Kenwood

5 reviews for UR6QW 8-Band Audio Equalizer V6 for Yaesu / Kenwood / Icom (8-Pin)

  1. Israel Román –

    After my constant praise for the good audio of my modulation with a v.7 version, a local radio colleague asked me to please buy an 8-band v.6 equalizer for his Icom transceivers.

    I have prepared everything together with a Shure SM-58 microphone (original, not fake) and we have tested it with wonderful results.

    It is without a doubt a magnificent job that they have done with these “all in one” boxes. The equalizer works very well, there are no RFI problems and the noise gate is simply magical.

    The fact that it is a “plug & play” product means that many hams can venture into ESSB audio without dying in the attempt, just by using the simple original handheld microphone the change is impressive.

    Again, thanks for everything

  2. Stéphane MORISSET (verified owner) –

    Égaliseur 8 bandes installé facilement sur un Yaesu Ftdx10 et micro de table M70. Tout fonctionne correctement et parfaitement.
    On m’a fait de bons retours sur la qualité de ma radio vocale.
    Colis reçu 1 semaine après l’achat, ce que j’ai apprécié.
    Le prix est très correct, les frais de port pour la France 15€.
    Je remercie également la réactivité du vendeur et de sa sympathie.
    Stéphane Nord Vendée 85 France.

  3. Petr (verified owner) –

    After a short consideration, I decided to buy the 8-band EQ V.6. Delivery took place within a few days. For a very affordable price, this is an amazing device that will give your transceiver a completely different dimension. Easy to use, the plug & play system just works. No interference enters the modulation path, the audio is amazingly clear and powerful. Noise gate works very well. I use the device with my Yaesu FT-1000MP Mark V Field along with a JBL studio microphone. The used XLR connector is practical and expands the possibilities of connecting a microphone. After testing it in real operation, I received positive reviews for clean and powerful Hi-Fi modulation. I am very satisfied with this product and highly recommend it to others.

  4. Rob EI4KI –

    Bout the latest V6 version and have to say I’m getting absolutely excellent audio reports. No need for me to mess with Radio menus. I can change between DX audio and Ragchew with a few knob turns. RF proof as well. No issues QRO. Excellent build quality. The addition of the noise gate is great feature.

  5. David –

    EQUALIZER V6 / 8 Bandes
    A very good reception of the very high quality V6/8 equalizer for my kenwood ts-850sat.
    A very fast delivery by Germany.
    UR6QW gave me all the information because it was only available in Germany by Wahtsapp messages.
    UR6QW also gave me his help to make it work a very professional and very kind person who answered all my messages.
    a big thank you UR6QW.
    David.
    France.

Add a review

Your email address will not be published. Required fields are marked *

Related products