-
Sale!
29,75 € Original price was: 29,75 €.19,04 €Current price is: 19,04 €. Incl. VAT, excl. shipping – calculated at checkout
For high-quality and beautiful soldering, it is necessary to choose the right power of the soldering iron to ensure a certain temperature of its tip.
This product will achieve excellent results at a low price. The device can also be used to smoothly adjust the power consumption of other devices with active load of which the power of which does not exceed 200W such as heating element, incandescent lamp, etc.
The device is installed in a socket, and the switching load is connected by a plug in a Digital Triac Power Regulator PMT-1A on the front panel of the device. A distinctive feature of this regulator is a three -bit LED indicator that displays the effective voltage selected by the user from 0 to 220V.
The power regulator is controlled using two buttons located on both sides of the indicator. The left button reduces the current voltage by 5 volts, the right increases it by 5 volts. To memorize the selected voltage value, you need to briefly clamp both buttons at the same time. Changing power at the load is carried out by switching it through the triac built into the device.
-
Sale!
4,76 € Original price was: 4,76 €.3,57 €Current price is: 3,57 €. Incl. VAT, excl. shipping – calculated at checkout
Many electronic devices operate in conditions where the fan rotates at idle, and create a constant, annoying noise, accelerating the wear of the fans. The function of this thermocontroller is to reduce the noise from the constantly-running fans by stopping them until the temperature exceeds a predetermined threshold. The module can be used in computer system units, in power units, and any other electronic devices that use cooling with fans. The proposed thermal controller works with 12V or 24V fans, in the start-stop mode, with a hysteresis of 2-5 ° C.
-
Sale!
17,85 € Original price was: 17,85 €.14,28 €Current price is: 14,28 €. Incl. VAT, excl. shipping – calculated at checkout
This kit allows you to assemble a laboratory power supply with output current and voltage
regulation and short circuit protection.
-
14,28 € Incl. VAT, excl. shipping – calculated at checkout
The device has a maximum output voltage of approximately 100 volts – 30 V DC and 3 Amp, which is ideal for your radio laboratory. Using the additional regulator, you can set any output voltage value up to 30 V. The device effectively controls the output flow. This function ensures the ability to cut off strings during short circuits and over-the-air conditions. A visual LED indicator is provided as soon as the set value has been moved.
-
Sale!
20,23 € Original price was: 20,23 €.14,28 €Current price is: 14,28 €. Incl. VAT, excl. shipping – calculated at checkout
Power regulators of the 216 series can be used in the regulation of lighting with
incandescent lamps, the temperature of heating the soldering iron, steplessly
controled, when controlling the heater, and the speed of rotation of electric
motors with a phase rotor.
-
Sale!
14,28 € Original price was: 14,28 €.4,76 €Current price is: 4,76 €. Incl. VAT, excl. shipping – calculated at checkout
Power regulators of the 216 series can be used in the regulation of lighting with incandescent lamps, the temperature of heating the soldering iron, steplessly controled, when controlling the heater, and the speed of rotation of electric motors with a phase rotor.
-
Sale!
16,66 € Original price was: 16,66 €.5,95 €Current price is: 5,95 €. Incl. VAT, excl. shipping – calculated at checkout
Power regulators of the 216 series can be used in the regulation of lighting with incandescent lamps, the temperature of heating the soldering iron, steplessly controled, when controlling the heater, and the speed of rotation of electric motors with a phase rotor.
-
Sale!
17,85 € Original price was: 17,85 €.11,90 €Current price is: 11,90 €. Incl. VAT, excl. shipping – calculated at checkout
The kit is intended for the manufacture of power control. The device can be used to adjust the power of heating,
lighting devices, collector AC motors, the maximum current of which does not exceed 25 A.
-
3,57 € Incl. VAT, excl. shipping – calculated at checkout
The voltage regulator module contains a rectifier and a stabilizer on a 7812 IC and is intended for use in simple devices that require a stabilized power supply of 12 Volts with a
current up to 1 Ampere.
-
4,76 € Incl. VAT, excl. shipping – calculated at checkout
The voltage regulator module contains a rectifier and a stabilizer on a 7805 IC and is intended for use in simple devices that require a stabilized power supply of 5 Volts with a current up to 1 Ampere.
-
14,28 € Incl. VAT, excl. shipping – calculated at checkout
In amateur radio practice, a power source is often needed, which has simplicity of execution, small dimensions and high load capacity. This kit will allow you to assemble an adjustable voltage regulator with a wide range of output voltage (3 … 27V) and an output current up to 10 A.
-
Rated 3.00 out of 5
13,09 € Incl. VAT, excl. shipping – calculated at checkout
In amateur radio practice, a power source is often needed, which has simplicity of execution, small dimensions and high load capacity. This kit will allow you to assemble an adjustable voltage regulator with a wide range of output voltage (5 … 27V) and an output current up to 20A.
-
17,85 € Incl. VAT, excl. shipping – calculated at checkout
In amateur radio practice, a power source is often needed, which has simplicity of execution, small dimensions and high load capacity. This kit will allow you to assemble an adjustable voltage regulator with a wide range of output voltage (5 … 27V) and an output current up to 20A.
